After weeks of pushing it off, it was time to face these shore kitchen windows head on.
I started with the usual tools - fabric, scissors, fabric glue, tape measure, an iron and some curtain grommets. I should have had 12-16 grommets but I only had 8 - I figured I'd make do and add more later. BIG MISTAKE #1 (more on that later.) The width right off the bolt worked perfectly for these decorative panels so I only had to cut once to make sure there was enough fabric for two panels that reached the floor. I cut so that there would be plenty of room at the bottom to hem in place.
Using the marked ends of the fabric as a guide, I folded over twice (ironing for each fold as I went) to make my left hem. When I was happy with how it looked, I applied a bead of glue to hold it down. When I had completed one side, I flipped the whole thing over and did the other. Technically you should wait until the glue is completely dry before moving on but I didn't wait and it didn't seem to be an issue.
At this point I had one big rectangle with two unfinished sides (top and bottom). Now it was time for the curtain header. I made another simple 1 inch hem with the glue but when that was dry I made a large 5 inch fold and glued again.
At last it was time for the grommets. Here is where I got tripped up. Somehow I didn't realize that I needed an even number of grommets until after I had completed the first drape. DOH!! MISTAKE #2: YOU MUST HAVE AN EVEN NUMBER. I added another grommet right next to the center one and that worked to make them functional but it will be a lot harder to add more now. Oh well, live and learn.
I hung them via the rod I installed a while back (its a closet rod!) and hemmed them in place to get a perfect fit. I was worried the glue wouldn't look as crisp but it looks great.
A very easy (yet extremely tedious) project complete. I think they add a lot to the room in terms of looking more finished and makes the whole seating area much more cozy. Excuse the droopiness - more grommets are on the way.
This room isn't quite done yet but I think its summer ready. I just need to find that marble cutting board several of you sugested (great idea!) and maybe something on the walls. What do you think?
Fabric is Waverly Cross Section
Light Fixture is custom made by Pickett Furniture
Walls are painted Restoration Hardware Silver Sage
Cabinet bottoms painted Martha Stewart Wrought Iron
Countertops painted with custom tinted Rustoleum Countertop
1 hour ago